It wouldn't surprise me if there were an element of truth in this, since while aerodynamic performance is improved, benefitting cooling airflow through the PC interior, the conductors are obviously squashed together, which is bound to increase crosstalk - the very reason that the 80-way cables were introduced in the first place! I've also come across various people reporting slower CD burn rates, more 'coasters', and more hard drive problems when using those expensive rounded drive cables. Remember that the Master device should be connected to the end connector on an IDE cable, and the slave to the one near the middle. You can find plenty more general information on IDE connections in my article on Optimising PC Hard Drives For Audio in SOS April 2002. This is the perfect no-compromise solution, although this approach will take more IRQs, which may be an issue if you're already short. Similarly, if you have both a CD-ROM and CD-R/W drive, make sure that they are on different IDE channels if you intend to copy CDs directly from one to the other.Īnyone with additional IDE controllers, either integral to the motherboard or on PCI expansion cards, will be able to configure each device as a Master on its own channel.
This arrangement is often strongly recommended in CD-R/W drive manuals, but isn't mandatory with most drives. If you only have a single hard drive, the easiest way to do this is to designate this as Primary Master, and the CD as Secondary Master.
UNINSTALL NORTON GHOST 9 INSTALL
So, if you intend to use your PC to burn a lot of audio CDs, make sure you install the CD-R/W drive on the other IDE channel from the hard drive you use to store image files, so that both source and destination can each have unrestricted access to the IDE buss. While installing two dissimilar devices on the same IDE channel won't force them both to the speed of the slower one, as is still popularly thought, only one can be accessed at a time. Like any device, a CD drive will need connecting to an appropriate IDE channel on your motherboard. However, nowadays, with much larger internal buffers of 4MB or more, as well as buffer under-run protection, IDE burners tend to be just as reliable and slightly cheaper, and avoid the added complications of installing SCSI in your PC. Many mastering engineers still seem to use SCSI drives (often Plextor models, since these have an enviable reputation for reliability and low Block Error Rates, or BLER), and they are still extremely useful if you want to use lots of drives for CD duplication purposes. Years ago, SCSI CD burners were seen as the only way to go if you wanted reliable performance, since they offered better multitasking capabilities than EIDE/ATAPI-based ones.
UNINSTALL NORTON GHOST 9 WINDOWS
Windows in its various incarnations has thrown up various issues to trick the unwary, while the BIOS may need adjusting, and even the way you connect your CD recorder to your motherboard may seriously affect performance. However, there are still problems that can emerge when you try to get CD writers to work properly on a PC. However, setting up your CD-R/W drives and persuading them to work at their best can be more complicated than it seems.Ĭompact discs in their various formats are now ubiquitous for storing both data and audio. For burning audio CDs on a PC, the more advanced pre-mastering applications like Steinberg's Wavelab not only provide a huge number of editing and track-indexing functions for adding the final polish to your tracks, but also graphic real-time track fades and drag-and-drop crossfading of tracks.Ĭheap, writable optical media have revolutionised the way PC users store audio and back up their data.
0 kommentar(er)
